E930 - EXTRUDER
MEASUREMENT SYSTEM FOR ALIGNMENT OF EXTRUSION MACHINES
Easy-Laser® E930 is designed to measure straightness and pointing direction, primarily on extruder pipes. Another application can be hydraulic pipes for example. With the system, pipes with diameters down to 50 mm can be measured, at a range of up to 40 m. The transmitter's laser beam can be compared to an absolutely straight and weightless ruler, that is to say a perfect starting point for precision measurement.
During the alignment procedure both detector and spindle are rotated, thus self calibrating the system. This way you can determine how the centre line of the spindle is, relative to the tube’s centre at the inlet end.
PROGRAMS AND FUNCTIONS
DOCUMENT YOUR MEASUREMENT RESULTS
The detector's measurement value is transferred to the display unit wirelessly via Bluetooth®, which means that one can measure more freely. The measurement system has programs that guide you step-by-step, using clear graphics on a large 5.7" colour screen. You can also produce full documentation for your measurement job, with direct generation of PDF reports, and database programs for PC for example.
MANY REASONS FOR ALIGNMENT
The gearbox shaft centre must coincide with the centre line of the extruder tube. Otherwise the screw at the inlet’s end will be pressed against the tube, which will lead to abnormal wear of both screw and tube along with increased energy consumption. This wear can also result in metal fragments in the produced material. It is important that the extruder tube is straight so that the screw does not rest against the tube in any part, which can result in abnormal wear and fragments of metal in produced material. We will also get a more even temperature of produced material which in the end results in a better product.
COMPLETE SYSTEM WITH ALL THE MEASURING PROGRAMS
Easy-Laser® E930 is a complete system in itself, with laser transmitter, detector and display unit. You can also add other parts from our extensive range to build a system that suits your specific needs and requirements, because all the measurement programs are included as standard. For example add shaft alignment equipment for other rotating machines, and lasers for flatness measurement.