Viber M2


alt="" title=""

VIBER M2™ is a 1 or 2 channel machine guard. The M2 can give an alarm or stop the machine if vibration indicates failure. The M2 is designed for standalone guard, but can send information into a programmable controller or to other monitoring system. Each Chanel has:

  • Three adjustable measure ranges
  • Two independent alarm levels with manual or auto reset
  • Frequency ranges can be set by embedded switches
  • Current output proportional to the vibration level 4- 20 mA,
  • Suitable for connection to a PLC
  • Monitoring of transducer and cable failure
  • Analysis signal on BNC and terminal output