Laser Transmitters

XT20/XT22

The two transmitters are at their core the same, but some things differ, addressing different user needs:

XT20 are for those who take flatness and straightness measurements for machine installations, and for those who check surface flatness on manufactured parts. XT20 is water and dust protected (IP55). This is the choice for maintenance and installation technicians. Excellent also for checking flange flatness.

XT22 in addition also lets you point the laser beam perpendicular to the laser plane. A built-in vertical preci­sion level also lets you level it when mounted on its side so the laser plane sweeps vertically. XT22 provides more options for geometrical measurements, and even higher accuracy and precision thanks to fiber laser technology, among other things. With this transmitter you can literally measure anything!

The XT transmitters have wireless connection to our XT Alignment App.

-

12-0146

For measuring spindle direction and straightness. Can be used in a rotating spindle (max. 2000 rpm). Measurement distance 20 metres [65’]. Mounting pin Ø20 mm [0.79”].

D, E

12-0075

For measuring straightness and spindle direction. M6 threads on ends and sides offer alternative mounting options. Measurement distance 40 m [130’].

With tilting screws for laser beam adjustment.

D, E

12-0706

For measuring straightness primarily in turbine applications. Measurement distance 40 m [130’]. The laser beam can be angled 90° to the sweep, within 0.01 mm/m [0.5 mils/INCH].

Battery adaptor (not pictured) and offset hub included. Brackets/arms may also be needed, but are not included. See also 12-0594.

D, E

12-0823

For measuring straightness on long distances. Measurement distance 100 m [328’] with a 20 mm PSD, >200 m [656’] with 30 mm PSD. M6 threads on front and bottom offer alternative mounting options. Built-in rechargeable battery and Oled display.

Coordinate table or tilt table needed for accurate functionality. No charger or bracketing included (compare with Part No. 12-0858).

D, E

12-0858

For measuring straightness on long distances. Measurement distance 100 m [328’] with a 20 mm PSD, >200 m [656’] with 30 mm PSD. M6 threads on front and bottom offer alternative mounting options. Built-in rechargeable battery and Oled display.

With tilt table (12-0864), which can be used with magnets or mounted on tripod, Battery charger 100–240 V AC (03-0821), USB memory stick with documentation, and Carrying case (12-0872).

D, E

12-0022

Laser transmitter D22 can be used to measure flatness, straightness, squareness and parallelism. The laser beam can sweep 360° with a measurement distance of up to 40 metres [130´] in radius. The laser beam can be angled 90° to the sweep, within 0.01 mm/m [0.01 mils/INCH]. Tilt table included.

D, E

12-0168

Laser transmitter D23 has a motor driven, rotating head that gives a 360° laser plane. Because the laser beam sweeps across the surface you do not need to align the beam for every detector position. Tilt table included. Measurement distance up to 20 metres [65´] in radius.

D, E