Detectors & Other Receivers

DETECTOR E9, 2-AXIS PSD E

Part no
:
12-0759
Description
:
Detector diameter 45 mm [1.77“]. 2 axis PSD, 20x20 mm [0.79”x0.79”]. Built-in 360° electronic inclinometer. Built-in Bluetooth® wireless communication and rechargeable battery. There is also a connector on the back side for standard “red cable” (charging and data transfer). Mounting threads on both ends, for tube adapters (01-0777) or other suitable brackets (e.g. 12-0767 and 12-0553).
Note
:
Make sure you have a suitable bracket!
Compatibility
:
E
Detector E9

DETECTOR E3 E

Part no
:
12-0799
Description
:
Detector for the E-series. 2 axis PSD, 30x30 mm [1.18”x1.18”]. Built-in Bluetooth® wireless communication. Battery status indicator. Built-in 360° electronic inclinometer. One connector on top side. Normally mounted on rods, but also has additional mounting threads on back side.
Note
:
Target/Dust cover for PSD included. Does not detect a spinning laser.
Compatibility
:
E
Detector E3 E

E-SERIES WIRELESS DETECTOR FOR BELT ALIGNMENT D E

Part no
:
12-0791
Description
:
Detector that reads off the sheaves position in two directions (horizontal+vertical) at the same time. With built-in display showing offset and angular values.
Note
:
Also for Bluetooth® wireless connection to separate display units which have the BTA digital program.
Compatibility
:
D, E
E-Series Wireless Detector

DIGITAL PRECISION LEVEL E290, COMPLETE KIT E

Part no
:
12-0857
Description
:
Digital precision level (12-0846), complete kit with Battery charger 100–240 V AC (03-0821), safety strap (12-0915) and USB memory stick with documentation (03-0914).
Note
:
Delivered in plastic case (12-0873).
Compatibility
:
E
Digital Precision Level E290

E-SERIES VIBROMETER PROBE E285 E

Part no
:
12-0656
Description
:
For measuring vibration level (mm/s, inch/s) and bearing condition value (g-value).
Note
:
Requires measurement program Vibrometer in the display unit. For connection, one of the red cables of the system is used. Cannot be connected to the D-series equipment!
Compatibility
:
E
E-Series Vibrometer Probe E285 E

ROLL ALIGNMENT KIT E

Part no
:
12-0856
Description
:
Includes roll bracket (12-0849), detector E2 (12-0845), digital level E290 (12-0846), adapter plate (12-0874), charger (03-0821), DC charging cable (12-0750), DC to USB adapter (12-0751), USB memory stick with documentation (03-0914).
Note
:
Delivered in plastic case (12-0871). As standard for roll diameters up to 400 mm. For larger roll diameters, please see Part No. 12-0885, Large Roll Kit.
Compatibility
:
E
Roll Alignment Kit E

Download EasyLink™ 3 Software    Download EasyLink™ 2 Software