022 6799 7858
022 6799 7858
We have a complete range of tools for belt alignment (even the world's only ATEX / Ex approved!). Choose between "visual" display on targets or digital display. Whatever your choice, the result will be fast and precise alignment.
For quick and easy alignment of sheaves/pulleys
For simple, quick alignment of belt drives.
The tool is fitted in a few seconds, and the laser line projected on the targets clearly shows how you need to adjust the machines. Compact and light.
Suitable for most types of drive, such as V-belt, toothed belt, flat belt and chain drives. Can also be used on non-magnetic pulleys.
Most belt / chain drives.
For quick and easy alignment of sheaves/pulleys
Easy-Laser® D90 is installed in a few seconds, and the laser line that is projected on the targets clearly shows how to adjust the machines. The tool has targets that can be read out "visually" and which give excellent degrees of accuracy that are sufficient for most users. If, in the future, you wish to have the option of digital readouts with the corresponding advantages, you can add a digital detector (see system D150 and D160).
D90 BTA is compact and light. Suitable for most types of drive, such as V-belt, timing belt, flat belt and chain drives.
Quick and easy alignment of sheaves/pulleys in ATEX / Ex environments
Intrinsically safe and approved for use in potentially explosive environments. The tool is fitted in a few seconds, and the laser line projected on the targets clearly shows how you need to adjust the machines. Compact and light. Suitable for most types of drive, such as V-belt, timing belt, flat belt and chain drives.
Fulfils the requirements according to: EEx ib IIC T3 Ta: 10-50 °C / Ex ib IIC T3 Ta: 10-50 °C
ATEX code: II 2 G
EX certificate number: Nemko 06ATEX1235X
IECEx certificate number: IECEx NEM 06.0003X
Align with tolerances with digital display
Easy-Laser® D150 has a combined detector/display instead of targets. The laser transmitter generates a laser plane that lies parallel to the reference pulley.
The detector reads off the position in relation to the laser plane and displays the parallel and angle phase digitally live. This makes alignment of the adjustable machine extremely easy. The accuracy of the reading means that you can be within the prescribed alignment tolerances and rely upon the result. Suitable for most types of drive, such as V-belt, timing belt, flat belt and chain drives.
"Live" digital read outs with shim corrections.
Easy-Laser® D160 has a separate detector unit and display unit. This means you can read and follow the alignment from where you are standing and making adjustments. The backlit display also makes it easier to read in poor light conditions.
The detector reads off the position in relation to the laser plane and digitally displays the parallel and angular misalignment "live". This makes alignment of the adjustable machine extremely easy. The accuracy of the reading means that you can be within the prescribed alignment tolerances and rely upon the result. With this system there is no need to move the detector to read horizontal respectively vertical values, which saves time and makes things easier. Suitable for most types of drive, such as V-belt, timing belt, flat belt and chain drives.
Easy-Laser® D160 detector unit can be connected to D480, D525, D505 & our standard display unit D279* which is included in shaft alignment systems D505 and D525 for example. The pulleys' mutual parallelism is shown graphically and digitally with adjustment and shim values for the machine's foot pair. This unit also allows you to save, print out and transfer the measurement results to a PC, in the same way as for normal shaft alignment
* Does not apply to system D450, which does not have the required software for sheave/pulley alignment. NB! Requires software version 1.06 or later for Display Unit D279.
