+91 22 67997859
info@tribotechindia.com
Laser Alignment Systems
Shaft Alignment
Belt Alignment
Geometrical Measurement Technology
Easy-Laser Plus
Alignment Accessories
Shims
Condition Monitoring
Vibration Measurement
Portable Vibration Instrument
Vibration Analyzer
Vibration Software
Balancing Instrument
Vibration Online Monitoring
Leak Finder
Handheld Thermometers
Industrial Stethoscope
Maintenance Products
Mounting Tools
Dismounting Tools
Automatic Lubricators
Non-Sparking Tools
Measuring Tools
Belt Tensioner
Speed Measurement Tachometers
Stroboscope
Non-destructive Testing Instrument
Crankshaft Deflection Indicators
Garage Equipments
Wheel Alignment
Wheel Balancer
Tire Changer
Mobile Column Lifts & Axle Stands
Induction Heater
Nitrogen Generators
Discontinued Products
Repair & Service Form
XT770 Shaft+GEO
The complete laser alignment system
The XT770 Shaft+GEO system has all the programs and functions you need to install and keep your machines up and running. Compared to the standard XT770 Shaft it also comes with a separate laser transmitter. With XT770 Shaft+GEO you can carry out the following:
- Align the machine
- Check soft foot
- Check twist and flatness
- Check straightness
- Measure machine movement over time
With XT770 Shaft+GEO you can perform shaft alignment of horizontally and vertically/flange mounted machines, and align machine trains with an unlimited number of machines. You can also measure straightness, flatness and twist of foundation, soft foot, bearing clearance, and more.
2 axis PSDs (position-sensitive detectors) permits adjustment of your machine both vertically and horizontally at the same time, with measuring units in any position.
You have a choice of five shaft alignment measurement methods, e.g. continuous sweep and multipoint. This gives you the flexibility you need to achieve the perfect measurement result. Read more about the different measurement methods under the Features tab.
Laser transmitters for geometric measurements
The system also includes laser transmitter XT20 or XT22, which allow you to take flatness and straightness measurements with the highest reliability and precision.
- XT20 is perfect for checking flatness and straightness during machine installation or surface flatness of machined parts.
- XT22 also lets you point the laser beam perpendicular to the laser plane. It provides more options for geometrical measurements, and even higher accuracy and precision.
Bore alignment capabilities
The Bore center program (coming soon) is used together with the Bore bracket kit (accessory) and its D75 laser transmitter. Either you use the XT70-M unit as detector, included with the XT770 system, or upgrade with the XT9 detector (accessory) to be able to measure smaller diameters. Different brackets can be used depending on the type of job.
Use with any display device
As all other XT systems, the XT770 Shaft+GEO can be used with the display unit of your choice. The XT Alignment app can be run on virtually any iOS or Android device*, or the Easy-Laser XT display unit. Click here for list of compatible devices.
Unique documentation possibilities
The XT display unit has a 13MP camera, and you can also get it with a built-in IR camera as an option. This means you can add a thermal image of the machine before and after alignment. In the app you can easily create and share a PDF report containing all measurement data and images.
