|
|
 |
 |
Vibration Tester TV200/260 |
 |
|
Prompt testing of vibration on the workshop machines. |
 |
For quick checking of unbalance misalignment, bearings and gears |
|
Guard against mechanical malfunction |
|
Holding tested value for 40 seconds |
|
Automatic switch off after 40 seconds |
|
Technical Specifications:
| Model |
TV200 |
TV260 |
| Parameter |
RMS of vibration velocity (mm/s) |
Acceleration, Velocity, Displacement |
| Testing range |
Velocity: 0.1mm/s~199.9mm/s |
Acceleration: 0.01m/S2~199.9m/s2 (peak)
Velocity: 0.01mm/s-199.9mm/s (RMS)
Displacement: 0.001mm-1.999mm (peak-peak) |
| Frequency range |
Velocity: 10Hz ~ 1kHz |
Acceleration: 10Hz ~ 1kHz
Velocity: 10Hz ~ 1kHz
Displacement: 10Hz ~ 500Hz |
| Accuracy |
±5%±2 |
±5%±2 |
| Display |
3½ digits LCD refresh interval about 0.5 second |
3½ digits LCD |
| Power Supplay Battery capacity |
two button batteries (LR44 or SR44) Approx. 5 hours working continuously |
two button batteries (LR44 or SR44) Approx. 4.5 hours working continuously |
| Operating Temperature |
0°C ~ 40°C |
0°C ~ 40°C |
| Environment Relative humidity |
<85% |
<85% |
| Dimension |
150mm X 22mm X 18mm |
150mm X 22mm X 18mm |
| Weight |
55g (include two batteries) |
55g (include two batteries) |
|
| Standard Delivery: |
|
Main unit |
1 |
|
Protective sheath |
1 |
|
Button battery |
2 |
|
TIME certificate |
1 |
|
Instruction manual |
1 |
|
Warranty card |
1 |
|
| Optional Accessories: |
|
None |
|
|
Vibration Tester TV300 |
 |
|
Large measuring range, displacement up to 18.1 |
|
Analyzer of acceleration, velocity, displacement, rotation speed, Frequency |
|
Three display modes Common mode display any one of peak acceleration, velocity in RMS and displacement in peak-to-peak |
|
Special mode display all the above options simultaneonsly |
|
Spectrum mode display spectrum charts |
|
Status bar on display with warning and alarm limit |
|
Memory for 25 x 62 readings and 25 spectral charts |
|
RS-232 output for printer or PC (optional software) |
|
Standard Delivery:
| Transducer |
Piezoelectric acceleration |
| Measurement range |
Acceleration:
0.1 m/s2-392m/s2 (peak)
Velocity: 0.01 cm/s-80cm/s (RMS)
Displacement: 0.001mm-18.1mm (peak-peak) |
| Frequency range |
Acceleration:
10-200Hz, 10-500Hz, 10Hz-1KHz,10Hz-10Hz-10KHz
Velocity: 10Hz-1KHz
Displacement: 10Hz-500Hz |
| Accuracy |
≤±5% |
| Operating temperature |
0°C-40°C |
| Humidity range |
≤80% |
| Display |
LCD, 320X200 pixels, with LED backlight |
| Power supply |
Li-ion rechargeable batteries charging time 12 hours |
| Dimensions |
171mmX78.5mmX28mms |
| Weight |
230g |
|
Standard Delivery:
|
Main unit |
1 |
|
Accelerometer probe |
1 |
|
Magnetic base |
1 |
|
Battery charger |
1 |
|
Protective sheath |
1 |
|
|
TIME certificate |
1 |
|
Instruction manual |
1 |
|
Warranty card |
1 |
|
Carrying case |
1 |
|
Optional Accessories:
|
Printer TA220S with cable |
|
Probe groupware |
|
Long needle |
|
Dataview with cable |
|
Vibration Tester TV110 |
Technical Specifications:
| Acceleration |
Peak Value from 0.1 to 199.9 (m/s2) |
Frequency range
10Hz to 500Hz
10Hz to 1KHz
10Hz to 10KHz |
| Velocity |
RMS from 0.01 to 19.99 (cm/s) |
Frequency range
10Hz to 500Hz
10Hz to 1KHz |
| Displacement |
Peak to peak from 0.001 to 1.999 (mm) |
Frequency range
10Hz to 500Hz |
| Operating temperature |
0°C-40°C |
|
| Power supplay |
Nickel-codmium battery 4X125V rechargeable |
|
| Dimensions |
270mmX86mmX47mm |
|
| Weight |
650g |
|
|
Standard Delivery:
|
Main unit with removable printer |
1 |
|
Accelerometer probe |
1 |
|
Magnetic base |
1 |
|
Battery charger |
1 |
|
|
TIME certificate |
1 |
|
Instruction manual |
1 |
|
Warranty card |
1 |
|
Carrying case |
1 |
|
Optional Accessories:
|
Probe groupware |
|
Long needle |
|
|
|
