|
|
 |
 |
Laser Transmitters
|
 |
Sviwelling Laser D22
Laser transmitter with swivelling head for 360° sweep of the laser beam.
The sweep can be leveled to a horizontal or vertical plane. The beam can be deflected 90° to the sweep.
Straightness, flatness, squareness, parallelism, level and plumb.
|
Part nr. 12-0022
 |
Sviwelling Laser D23
Laser transmitter with motor-driven rotating head (360°).
(Use with detector D6.)
Straightness, flatness och parallelism.
Part nr. 12-0168
|
 |
Laser Transmitter D75
The laser transmitter D75 is used for measurement of straightness and spindle direction.
At the sides M6-threads allow alternative mounting possibilities. This transmitter comes as standard with the extruder, Linebore and Turbine system.
Straightness and plumb.
|
Part nr. 12-0075
 |
Spindle Laser D146
Laser transmitter for measurement of spindle direction and
straightness.
Attached to a spindle
it will project concentric circles when the spindle
is rotated. The centres of those circles are the same
as for the pointing direction of the spindle. This allows
measurement of the pointing direction of
|
the spindle relative to the ovement of the detector, as well as straightness along the spindle direction. The clamping pin can be mounted at both ends of the transmitter. Pins of different diameters can be used.
Straightness and plumb.
Part
nr. 12-0146
Download Demo
|
Detectors
|
 |
Detector D5
Detector that can read the position of a laserbeam.
Built-in electronic 360° inclinometer and thermal sensor. A number of threads and mounting holes allow varying attachement possibilities. Vials and target for rough alignment. Two alternative connections for display unit and other detectors. Markings for measurement directions.
|
Part
nr. 12-0005
 |
Detector D6
With SpinLaser Technology™
Detector that can read the position of a rotating laser beam from the D23 laser transmitter. Built-in electronic 360° inclinometer and thermal sensor. Two alternative connections for display unit and other detectors.
|
Part
nr. 12-0201
 |
Detector D157
Detector that can read the position of a laser beam.
Built-in electronic
inclinometer. Housing with eight threads (M5) allow
varying attachment possibilities. Two alternative connections
for display unit. Markings for measurement directions.
|
Part
nr. 12-0157
|
Miscellaneous Accessories
|
 |
Printer:
Battery operated thermal printer with cable and charger.
Part nr. 03-0032
|
 |
Angular Prism D46
For 90° deflection of the laserbeam ± 0.01 mm/m.
Part nr. 12-0046
|
|
|
|
