Portable

BASIC VIBRATION METER VIBER A

We have attained immense market appreciation owing to our Viber A, which is procured from reputed vendors.

This pocket sized instruments is easy to use and deliver accurate measurement results. We pack our range using superior quality material before being offered to the customers. Our clients can avail this instrument from us at industry leading prices.

Some highlighting features of our range of Viber A :

Pocket size

RMS value

Wide frequency range

Bearing Condition

Easy to read

Automatic shut off

COMPLETE VIBRATION METER VIBER X2

VIBER X2™ is designed for maintenance/repairer and operators personnel that needs a reliable, fast and easy to use tool for basic condition monitoring checks in rough conditions.

The VIBER X2^TM instrument has the following features:

• Accurate measurements for 3 selectable frequency ranges.
• Real-time measurement of the total vibration level and the Bearing Condition (BC), shown simultaneously.
• Measurement units and measurement presentation may be selected by the user from the following list:
  
  g (RMS, Peak or P-P)
  mm/sec (RMS, Peak or P-P)
  µm (RMS, Peak or P-P)
  inch/sec (RMS, Peak or P-P)
  mils (RMS, Peak or P-P)
  
• Bearing Condition measurements in a wide frequency range (0, 5 - 30 kHz).
• Bar indicator shows measurement stability.
• Fast and easy fault analysis displaying the highest peak frequency in CPM or Hz.
• Large dynamic range of the vibration signal (up to 50 g).
• Low power consumption.
• High performance accelerometer.
• Clear vibration and danger alarms by red and yellow colour LED's.
• Easy to understand and operate.
• Fast battery charging capability using an external charger, provided in the delivery.
• Advanced technology with DSP processor.
• Display with backlight.
• Several languages.
• Adjustable Auto-shut off for energy saving.
• Dust and waterproof, for rough use (IP 67).

COMPLETE VIBRATION METER VIBER X3 WITH TEMPERATURE AND SOUND

VIBER X3™ is designed for maintenance/repairer, and operators personnel.

It is an excellent tool, for basic condition monitoring checks, easy to use and reliable for status analyse.

The VIBER X3^TM instrument has the following features:

• Accurate measurements for 3 selectable frequency ranges.
• Real-time measurement of the total vibration level and the Bearing Condition (BC), shown simultaneously.
• Headphone set with volume control and high pass filter for bearing noise detection.
• Listening to bearing sound while comparing the displayed BC value.
• Measurement units and measurement presentation may be selected by the user from the following list:
  
  g (RMS, Peak or P-P)
  mm/sec (RMS, Peak or P-P)
  µm (RMS, Peak or P-P)
  inch/sec (RMS, Peak or P-P)
  mils (RMS, Peak or P-P)
  
• Bearing Condition measurements in a wide frequency range (0, 5 - 30 kHz).
• Built-in infrared temperature sensor, units in °C or °F.
• Bar indicator shows measurement stability.
• Fast and easy fault analysis displaying the largest amplitude peak frequency in CPM or Hz in main screen display.
• Large dynamic range of the vibration signal (up to 50 g).
• Low power consumption.
• High performance accelerometer.
• Clear vibration, temperature and danger alarms by red and yellow colour LED's.
• Easy to understand and operate.
• Fast battery charging capability using an external charger, provided in the delivery.
• Advanced technology with DSP processor.
• Display with backlight.
• Several languages.
• Adjustable Auto-shut off for energy saving.
• Dust and waterproof, for rough use (IP 65).

VIBRATION ROUTE ANALYSER X-Viber

A large step towards a well planned machine maintenance.

With X-Viber, measurements are fast and easy, because of the Route function.

Vibration level, temperature and RPM is measured with the same instrument, which simplifies the measurements.

Balancing, Spectrum measurement and Analyzing are also possible with X-Viber. For balancing, a balancing kit is available.

Some highlighting features of our range of X-Viber :

Route

Total Level

Envelope

Bearing Condition value

Analysis

Temperature

Speed

Route via X-Trend software

Selectable

Options

VIBRATION MEASURING INSTRUMENT Easy-Balancer

8 measurement programs

The Easy-BalancerTM system comes with 8 standard measurement programs, all in one display unit, and each one optimized for special measurement applications. Easy-BalancerTM can measure two transducers simultaneously. Here follows a brief introduction to each program.

• Frequency analysis
• Time Signal
• Coast-Up and Coast-Down
• Static and Dynamic
  Balancing

• Envelope
• Quick balancing.
• Total level
• Bearing condition value

It has following properties

VIBRATION SPECTRUM FFT ANALYSER Easy-Viber

You have many machines and you measure often.You need a powerful maintenance tool to do this job.

Easy-Viber with many functions, like Route, Frequency analysis, Balancing etc. is a perfect choice.

Features

Built in program in several languages.

Route measurements transferred to SpectraPro software.

Balancing with 2 transducers simultaneously.

Additional frequency analysis with transfer to PC.

10 measurement programs

The Easy-ViberTM system comes with 9 standard measurement programs, all in one display unit, and each one optimized for special measurement applications. Easy-ViberTM can measure two transducers simultaneously. Here follows a brief introduction to each program.

• Quick balancing
• Vibshape measurements
• Total level
• Bearing condition value
• Temperature measurement

VIBRATION SPECTRUM FFT ANALYSER Easy Viber X5/X6

VIBER X5™

Additional software as an option. When buying a VIBER X5T you can add features.

Included in the standard delivery are:

• 2 Accelerometers, VMI 192
• Internal IR temperature meter
• Possibility to listening to the bearings while measuring
• IP68 rugged carrying case
• Extension tip
• Desktop charger
• Hand straps for comfortable use
• USB cable for connection to a computer
• Free software update
• 2 year manufacturing warranty with possibility for extension up to 6 years

• One- and two- plane balancing
• Route based data collection
• Multimeter, process parameters
• Data logger for long-term recording
• Coast- down/- up
• Orbit
• Bearing condition
• Amplitude and Phase
• Envelope
• Spectra
• Waveform
• Temperature, built in IR transducer