Buslift

Mobile heavy Duty Column lift set of 4 columns

Mobile column lift with neat and useful features.
(set of 4 mobile columns 5.5 or 6.5 tonnes non expandable to 6 columns).

Because 95% of commercial vehicles need 4 columns only to be lifted, BusLift® has designed the EASY mobile column lift that will be able to satisfy most of your requirements.

You may operate the lift by means of "dead man" type push buttons or through a remote control supplied with a 3 meters long-cable.

Mobile heavy Duty Column lift set of 4 columns with possibility of expanding
to more columns

Advanced lift allowing the expansion to 6 columns and the lifting by pair among other useful additional characteristics.
(set of 4 mobile columns 5.5, 6.5 or 7.5 tonnes).

Easy+ offers advanced functions suitable to meet most stringent requirements :

• Operation from the remote control connectable on each column
• Pair Operation
• Expansion to 6 Columns
• ...and many more

Remote control (reference BL RC)

Remote control with 10 meters long-cable to pilot the lift from the master column in "all" mode. Only available for easy range

Plastic cover protection (reference BL PC)

Set of 4 Plastic cover protection for intensive use in wash bays

Jacking unit (reference BL HD)

Set of 4 hydraulic palette jack "Deadman" type Only available for easy range

Van's adaptor (reference BL FRV 01)

Set of 4 fork reducer for vans
- Capacity 4.8 tonnes -
Fit to wheel diameter 600 to 930 mm

Car's adaptor (reference BL FRC 01)

Set of 4 fork reducer for cars
- Capacity 2 tonnes -
Fit to wheel diameter 500 to 730 mm

Trailer beam (reference BL LB 02)

Lifting beam for trailer
maximum capacity: 3 x 5 tonnes

Lifting beam (reference BL LB 01)

Lifting beam for bus & coach maximum capacity: 2 x 6 tonnes

Transmission jack (reference BL TJ 15)

1.5 tonnes transmission jack with a multi-position swivel head

14 t small axle stand (reference BL 140)

Mini/maxi: 300 - 445 mm
5 positions

14 t small axle stand (reference BL 141)

Mini/maxi: 450 - 730 mm
8 positions

14 t small axle stand (reference BL 142)

Mini/maxi: 685 - 1125 mm
12 positions

6 t tall axle stand (reference BL 060)

Mini/maxi: 1130 - 1840 mm
10 positions

10 t tall axle stand (reference BL 100)

Mini/maxi: 1380 - 2100 mm
10 positions

15 t tall axle stand (reference BL 150)

Mini/maxi: 1385 - 2025 mm
10 positions
Spring loaded / with screw at the top

Technology

Easy to install

Just plug and play. No programming or configuration is required!

Easy to use

2 push buttons to lift up or down the vehicle and that's it!

Easy to handle

335 kg only and an ergonomic drawbar. (that's 20 to 30 % less than any other make).

Easy to store

Thanks to its reduced dimension, you can easily store your lift and use the free area when your maintenance operation is done.

Easy to maintain

No special tools or proprietary consumable. No training required to maintain your equipment as maintenance is . extremely simple.

Specifications